1. Manuals
  2. Brands
  3. CLiC-iT Manuals
  4. Safety Equipment
  5. IMN PU-V6
  6. Instruction and maintenance manual

CLiC-iT IMN PU-V6 Instruction And Maintenance Manual

Continuous belay system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1
&
&
CONTINUOUS BELAY SYSTEM
INSTRUCTIONS AND MAINTENANCE MANUAL
Ed16 17-09-21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMN PU-V6 and is the answer not in the manual?

Questions and answers

Related Manuals for CLiC-iT IMN PU-V6

Summary of Contents for CLiC-iT IMN PU-V6

  • Page 1 & & CONTINUOUS BELAY SYSTEM INSTRUCTIONS AND MAINTENANCE MANUAL Ed16 17-09-21...

  • Page 2: Table Of Contents

    Ar culated Arm on trees using Li ing Sling........................19 6.6. Anchor Plate for Trees using ratchet tape........................19 IMN & CLiC-iT Continuous Belay System Height................20 IMN & CLiC-iT Continuous Belay System Path ................21 8.1. Icons for CBS schemes..

  • Page 3: Clic-It Pulley

    2016/425. Its main functions are to assure the user to the lifeline and to provide a continuous movement through it. It´s not necessary for the user to perform any manipulation in CLiC-iT Pulley until get out of the lifeline.This product is a Personal Protection Equipment designed for leisure activities at heights (high rope adventure parks) as per standard EN17109:2020.

  • Page 4: Func Onality

    Placing on the safety line Locking system Make sure you are in a safe position on the floor and disconnect the carabiner from CLiC-iT Pulley When the MCD is in working condition it remains in case it is connected.

  • Page 5: Carabiner Connec On

    Below are the dimensions of the MCD hole for anchors. carabiners: 16,45mm 13,10mm Consult your carabiner technical specifications to check compatibility with CLiC-iT Pulley. Recommended carabiner Allowed carabiners Safety Class E Safety Class B (risk of openning) To ensure system safety, use only Pin Lock-type carabiners as recommended below in conjunction with CLiC-iT Pulley.

  • Page 6: Lanyard Connec On

    Connection with harness. of the MCD. A type Lark´s head / Cow Regardless of the height at which IMN&CLiC-iT CBS is installed, hitch knot connection is See your lanyard instructions for the adjustable lanyard must be adjusted in the user´s harness recommended.

  • Page 7: Safetyline Anchorages Compa Bility

    Structural anchorages compatible with the CLiC-iT Pulley must meet the requirements of the UNE EN 795:2012 standard to ensure user safety. Below are the dimensional requirements that an anchorage must meet to be considered compatible with the CLiC-iT Pulley: The anchorage must be inclined 35º with the vertical axis to ensure correct movement of the MCD, correct stability Ÿ...

  • Page 8: Anchor

    A n c h o r a l l o w s a c o n t i n u o u s movement for CLiC-iT Pulley along the entire game course. Its function is to guide the IMN&CliC-iT Safety Line cable and keeping it fixed at a certain point. To do this, 3 gripping pieces press the cable and prevent any movement.

  • Page 9: Traceability And Marking

    Limit load capacity established by the YY: manufacturing year. manufacturer for use in the indicated Use the product with Pin Lock carabiners as Reference of the product: direction. recommended in the section 1.2 of this manual. IMN reference: PU-V6 CLiC-iT reference: DAS-436...

  • Page 10: Anchor Wedge

    Anchor Plate for Trees is used in adventure parks installed on trees. On this are mounted the necessary elements to drive Articulated arms the IMN & CLiC-iT CBS in the desired direction. The installation system prevents References: damage to the natural environment.

  • Page 11: Ar Culated Arms. Types And Connec Ons

    & Other IMN & CLiC-iT CBS components Articulated arms. Types and connections SAL-V1 Arm connection Simple articulated Arm (Left side) in structural parks The arm is installed with one or two 5/8 (inch) shackles depending on the case. For vertical structural...

  • Page 12: Non-Returns. Types And Connec Ons

    & Other IMN & CLiC-iT CBS components Non-Returns. Types and connections DIN 7380 Screw Non-Return devices are used to stop and prevent the MCD move back at certain points in the path. It M8x20 (min.) is useful in inclined sections, in entrances or exits of the park or to control the flow of users in ziplines.
  • Page 13 & Other IMN & CLiC-iT CBS components Non-Returns. Types and connections TYPE D How to install it? Structural Non-Return Reference: NR4-V1 The cable crimping must be done with a crimping tool capable of exerting a force of 130 KN. The crimp die used must be of type K18 Non-Return devices are used to stop and prevent the MDC move back at certain according to DIN 48083.

  • Page 14: Posi Oners. Types And Connec Ons

    & Other IMN & CLiC-iT CBS components Positioners. Types and connections Cable Connector DIN 7380 Set Screw Positioners are an economical option to guide the safety Positioners fixes At times during installation there may be a need to connect two...

  • Page 15: Route Swapper

    The cable crimping must be done with a crimping tool capable of should be installed at a comfortable height where the user will have to manipulate CLiC-iT Pulley. exerting a force of 130 KN. The crimp die used must be of type K18 according to DIN 48083.

  • Page 16: Assemblies

    & Assemblies Anchor and Anchor Wedge Anchor Wedge Screws Assembly order DIN 933 M8x35 1st Step Self-Locking nuts Anchor DIN 985 M8 Wedge Anchor Screws DIN 912 M8x35 Anchor Wedge Anchor Required tools: Required tools: Hex Key - 6mm (7/32'') Spanner - ISO/DIN13mm...

  • Page 17: Anchor And Inverter

    & Assemblies CBS Anchor and Inverter Arm Assembly order Inverter I nv e r t e r S c r e w s DIN 933 M8x35(min) 2nd Step Self-Locking nuts Self-Locking nuts DIN 985 M8 DIN 985 M8 CBS Wedge Anchor Assembled Structural post...

  • Page 18: Anchor And Ar Culated Arm

    & Assemblies Anchor and Articulated Arms Articulated Arm Flat Washer DIN 125 M8 Self-Locking nuts DIN 985 M8 Anchor Screws DIN 912 M8x35 Required tools: Anchor Spanner - ISO/DIN13mm Hex Key - 6mm (7/32'') Anchor Plate for Trees and Vertical Positioner Anchor Plate for Trees Required tools: Spanner - ISO/DIN13mm...

  • Page 19: Ar Culated Arm On Trees Using Li Ing Sling

    & Assemblies Articulated Arm on trees using lifting sling To install an Articulated Arm on a tree a 2000 Kg Ø Tree 10-15cm Lark´s head lifting sling is required. The remaining length after the knot should protrude between 10 and 15 cm. Be sure to measure the diameter of the tree at the height where the installation will be made.

  • Page 20: Imn & Clic-It Continuous Belay System Height

    & IMN & CLiC-iT Continuous Belay System height CBS example Safety cable height. Non-Return Type D 170 to 200 cm above platform for cable slope > 6º in a park with x>6º two heigh levels Beginning. aprox 160cm above floor x<6º...

  • Page 21: Imn & Clic-It Continuous Belay System Path

    & IMN & CLiC-iT Continuous Belay System. Path Optimal path. This is the most Attention. In configurations Invalid path. The safety line Attention. If the trajectory optimal configuration for the where the safety line moves p o s i t i o n i n g m u s t b e runs internally a proper safety line.

  • Page 22: Icons For Cbs Schemes

    & IMN & CLiC-iT Continuous Belay System. Path Icons for CBS schemes Matching drawings with IMN & CLiC-iT CBS elements for the following schemes:...

  • Page 23: Cbs Path Examples

    & IMN & CLiC-iT Continuous Belay System. Path Path examples Access to level two rope course Safety line from floor Access...
  • Page 24 & IMN & CLiC-iT Continuous Belay System. Path Path examples Level one rope course access Safety line from floor 90º<x<180º...
  • Page 25 & IMN & CLiC-iT Continuous Belay System. Path Path examples 135º 90º 90º 135º 135º 45º 135º 135º 45º...
  • Page 26 & IMN & CLiC-iT Continuous Belay System. Path Path examples 115º 135º 45º 90º 90º 30º 135º 45º 115º...
  • Page 27 & IMN & CLiC-iT Continuous Belay System. Path Path examples 120º 60º NO ARMS START / END...
  • Page 28 & IMN & CLiC-iT Continuous Belay System. Path Path examples Other examples of park entrances and exits:...
  • Page 29 & IMN & CLiC-iT Continuous Belay System. Path Path examples Other examples of park entrances and exits:...
  • Page 30 & IMN & CLiC-iT Continuous Belay System. Path Path examples Other examples of park entrances and exits: Zipline...
  • Page 31 & IMN & CLiC-iT Continuous Belay System. Path Path examples Other examples of park entrances and exits:...
  • Page 32 & IMN & CLiC-iT Continuous Belay System Path Path examples Other trajectory situations:...

  • Page 33: Imn&Clic-It Continuous Belay System. Specifications

    & IMN & CLiC-iT Continuous Belay System. Speci cations Installation according to different inclination cases CASE A CASE B CASE C Straight cable Non-Return Type D Sections of more than 6º slope are not recommended because the user When the cable is relatively When the safety line has less can slide towards the post.

  • Page 34: Ziplines

    & IMN & CLiC-iT Continuous Belay System. Speci cations Ziplines The user is allowed to hold 150m The maximum zipline extension compatible with system is. IMN & CLiC-iT CBS in zip lines. CLiC-iT Pulley Zipline arms should be placed between two Anchors. One before entering the zipline and one at the exit.

  • Page 35: Installa On According To Different Structural Anchoring Cases

    & IMN & CLiC-iT Continuous Belay System. Speci cations Installation according to different structural anchoring cases TYPE A TYPE B TYPE C HORIZONTAL STRUCTURAL SUPPORT. SQUARE CASE VERTICAL STRUCTURAL SUPPORT. CIRCULAR CASE ADAPTED STRUCTURAL SUPPORTS Structural connections examples for this case:...

  • Page 36: Requirements For Cbs Anchorages Installa On

    & IMN & CLiC-iT Continuous Belay System. Speci cations Requirements for CBS anchorages installation DIN 933 Screw The location where the IMN&CLiC-iT The connection of Anchor Wedge on a vertical surface is carried out M8x35 (min.) CBS elements will be installed shall...

  • Page 37: Safety Line Cable Installa On

    & IMN & CLiC-iT Continuous Belay System. Speci cations Safety line cable installation The point where the cable enters the Anchor must be at least 5 cm long in straight extension with respect to the direction of the Anchor, to prevent the MCD from hitting the Anchor. These two points must be marked in order to carry out inspections and check that the cable does not slide.
  • Page 38 & IMN & CLiC-iT Continuous Belay System. Speci cations. Safety line cable installation At the safety line terminals, both at the beginning and at the end, we must leave at least 15 cm of free cable that leaves in excess of the Anchor cylinder.

  • Page 39: Responsability & General Recomendations

    & RESPONSABILITY & GENERAL RECOMENDATIONS IMN & CLiC-iT Continuous Belay System components are intended for activities involving a risk to safety and health. Both the installation and the use of this product must respect the specifications provided by the manufacturer in this manual. In addition, the user must respect the preliminary usage indications of monitors and instructors.

  • Page 40: Further Informa Ons

    & RESPONSABILITY & GENERAL RECOMENDATIONS Further informations Training of the staff 10.1 10.3 The use and storage temperature range should be between - 10 All staff members must be aware of their responsibilities in order to Ÿ and +50°C. Outside this temperature range, the product resistance establish a safe environment.

  • Page 41: Usage Precautions

    & Usage precautions The list of recommendations stated here above is only to be used as a general guideline to limit the risks involved with climbing in adventure parks. This guideline is by no means exhaustive. It should be taken into consideration and validated by park builders and operators and shall continuously be expanded in accordance with feedback and experiences.
  • Page 42 & Usage precautions The recommended safety line Caution with possible tangling of During the safety briefing it is The landyard must not be too loose height for public from 4 to 14 years is MCD rollers with the participant’s convenient to warn about the or too short, so that it allows the 1.70m.

  • Page 43: Product Life Cycle And Warranty

    & Usage precautions Product life cycle and Warranty IMN & CLiC-iT works with the best materials and our components are always subject to the current regulations and their corresponding quality certificates. If you detect or suspect factory malfunctions contact with IMN as soon as possible for replacement.

  • Page 44: Product References

    & Product References 3 13 Name: CLiC-iT Pulley Name: Name: Anchor Plate for trees Simple Articulated Arm (Left Side) Reference: PU-V6 Reference: AP-V2 Reference: SAL-V1 Pages: 3 to 7 Pages: 10 Pages: 10,11 Name: Anchor Name: Inverter Name: Simple Articulated Arm (Right Side)

  • Page 45: Use And Safety Infographic

    & Annex A - Use and safety infographic Brie ng example...

  • Page 46: Control And Maintenance Sheet

    IINFINITY lock works properly when carabiner is inserted and removed The passage of the pulley in the anchor points of IMN & CLiC-IT CBS are smooth and without relevant collisions. There are no collisions with the structure. And the dimensional specifications described in the manual are met.
  • Page 47 & Installation history. (disassemblies, replacements, environmental accidents, repairs ...) Description Date Comments regarding product conditions and usability: Inspected by: Maintenance Conclusion: Company name: SUITABLE Signature: Next inspection date: UNSUITABLE ____ / ____ / ____ Date:...
  • Page 48 & INSTALACIONES EN MEDIO NATURAL the safety line system declares that: Manufacturer: INSTALACIONES EN MEDIO NATURAL S.L IMN CONTINUOUS BELAY SYSTEM Avda Mairena del Aljarafe, Nº 34-B and its components: CP 41110 Bollullos de la Mitación (SEVILLA) PU-V6 IN-V3 SAR-V1 AN-V3 CC-V1 DAL-V1...
  • Page 49 &...

This manual is also suitable for:

Imn vp-v1Imn hp-v1Imn an-v3Imn nr3-v1Imn sal-v1Imn cc-v1 ... Show all

Table of Contents