Advertisement
Available languages
Available languages
EN
MEZO
2. Introduction to Exhaust Hose Installation
Temporary installation (AS shown in the figure above):
(1) Twist both ends of the exhaust hose into the square fixing clip and the flat fixing clip.
(2) Insert the square fixing clip into openings at back of the air conditioner.
(3) Put the other end of the exhaust hose to the near windowsill.
3. Window Slider Kit Installation(optional)
The installation manner of window slider kit is mostly in "horizontal" and "vertical", No much
difference in actual process.
4. Continuous drainage - pipe installation
1.
Remove the screw cover of the machine and pull out the rubber water plug inside;
2.
Install the drainage nozzle;
3.
Finally, install the drain pipe on the drain changer.
41
www.eberg.eu
Advertisement
