Advertisement
Available languages
Available languages
EN
MEZO
SLEEP
1. When in cooling mode, when press the sleep button to enter sleep mode, an hour later, the
set temperature automatically increase 1 °C, 2 hours later, the set temperature automatically add
2 °C.
2. When the heating mode, when press the sleep button to enter sleep mode, an hour later,
the set temperature automatically reduce 1 °C, 2 hours later, the set temperature automatically
reduce 2 °C.
3. Press the sleep button again to exit the sleep function.
Note: in sleep mode, the wind speed will be locked in low wind and the temperature can not be
adjusted.
TIMER
You can set the timer on/off.
Timing start up: after setting timing start up, the machine will automatically start up and run
when the timing time arrives.
In standby mode, press the timing key, and the corresponding timing indicator time value
flashes.The timing time can be adjusted by adjusting the temperature up and down key (step
distance is 1 hour), and the time interval range can be set as 1~24 hours.Finally, press this button
to start timing. At this time, the timing indicates that the time value is always on, and the display
displays the remaining time.
1. The machine will automatically start up and run after the timing time is set.
2. If you want to cancel the timing function, you can press this button again.
3. If the set timing boot time is not reached, press the „on/off" button in advance, the timing will
be cancelled, and the machine will start up and run at the same time.
Regular shutdown: after regular shutdown is set, the machine will automatically stop running
when the regular time is reached.
1. The machine will shut down automatically when the timing time is set.
2. If you want to cancel the timing function, you can press this button again.
3. If the set timing shutdown time is not reached, press the „on/off" button in advance, the timing
will be cancelled, and the machine will be shut down and stop running.
ON/OFF
Press „on/off" to start up, and then press „on/off" to shut down.
WIND
Press the swing wind button to start the swing wind function;Press the swing
button again, and the left and right swing function will be cancelled.
TEMP -
Under cooling and heating function, set in the range of 16 ~ 31 °C
temperature.Every click on the temperature, set temperature reduced by 1 °C.
TEMP+
Under cooling and heating function, set in the range of 16 ~ 31 °C
temperature.Each press keys on temperature, set temperature increase 1 °C.
37
www.eberg.eu
Advertisement
