Figure 45 Editing U-Boot-Env-Dm810X-Rdk.txt; Figure 46 Minicom Terminal Settings - Z3 Technology Z3-DM8107-RPS User Manual

(d) In the editor, you want to modify the values for nfsserver, serverip, gatewayip, netmask,
ipaddr, tftp_root, and nfs_root – as shown below:
The value for tftp_root, when combined with the value of "server_args" in your
/etc/xinetd.d/tftp
The value of nfs_root should point to the fs subdirectory within the filesys link you set up in
step (2e).
(e) Save your changes and then copy this file to your home directory (this will make it easy to
transfer from minicom later).
# cp u-boot-env-dm810x-rdk.txt /home/z3
(f) Now set up your terminal program to take input from a file. If you are using minicom, type
<ctl-A>, and Z. This should bring up the minicom Command Summary. From here, type "T"
to bring up the "Terminal Settings" window. From here, set "Newline tx delay (ms)" (option
D) to 100, and "Character tx delay (ms)" (option F) to 1:
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL

Figure 45 Editing u-boot-env-dm810x-rdk.txt

file (step (1b)), should point to the images link you set up in step (2e).

Figure 46 Minicom Terminal Settings

th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Modify to match the IP address of your Linux PC
Modify to match the IP address of router
Modify to match the netmask of your Linux PC
(should be same as Target netmask)
Modify to match your TFTP and NFS
configuration (see below)
50
DOC-USR-0012-08
Change to 100
Change to 1