Using Your Juicer - Optimum RKS-3015 Operating Instructions Manual

juicing bowl. Ensure that the silicon is firmly inserted into
the whole. (see fig.1)
3. P lace the juicing bowl on top of the motor base ensuring
the 3 holes of the juice bowl align with the 3 screens on the
motor base, align the triangle mark of the juice bowl with
the triangle mark on the motor base, press down the juice
bowl and rotate in a clockwise direction, then lock it into
position. (see Fig. 2)
Fig. 2
4. A ssemble the strainer into the strainer holder, then place
this assembled in to the juicing bowl. (see Fig. 3)
5. N ote that the triangle mark on the strainer needs to align
with the triangle mark on the juicing bowl. Ensure that the
strainer is completely pushed down. (see Fig. 4)
6. P lace the Auger into the strainer. Ensure that the Auger is
in position by pressing down on it, and feeling the Auger
click into place. (see Fig. 5)
7. P lace the Hopper onto the juice bowl. Align the triangle
mark on the Hopper with the triangle mark on the
juice bowl and turn it clockwise to the locked position.
The Hopper will click into position. (see Fig. 6)
8. Place the food pusher into the hopper.
9. P lace the pulp cup so it fits in position on the left hand side
of the juicer's main body.
10. Place the juice cup under the Juicer spout.
11. S lide the food pusher down the food chute. The pusher can
only fit one way.
IMPORTANT: If the Juice bowl and lid are not
correctly assembled, the Juicer will not operate.
This is a safety feature.
Fig. 3

USING YOUR JUICER

1. Clean fruit and vegetables thoroughly, ready for juicing.
2. I f juicing fruit with stones or hard seeds, pit the fruit.
3. I f pieces of fruit or vegetables are very large, chop them
4. E nsure the safety clamps are locked in position on top of
5. Turn the control switch To On to juice fruits.
6. P ress the food pusher slowly down until all fruit or
Fig. 4
7.
8. T he juice from the fruit and/or vegetables will flow
9. W hen juicing is complete, ensure that the juicer's control
Auger
10. I f the Juice Bowl is stuck and does not detach from the
Filter
base, Press the reverse button "R" for 3-5 seconds. Repeat
this process 2-3 times. Then push the bowl upward while
turning.
Fig. 5
11. The strainer is equipped with an auto-cleaning brush.
12. A llowed time of continuous work of the juicer – 10
DISASSEMBLE YOUR JUICER
1. E nsure the juicer is turned off and the power cord is
unplugged from the power outlet. (see Fig. 7)
2. Remove the pulp tank and juice cup.
3. R emove the hopper by turning it to the open position (anti-
clockwise). (see Fig. 8)
Main Base
Hopper
Hopper
Main Base
Assembling
OK
Remove any hard inedible skins, i.e. skin of melons,
pineapples and mangoes prior to juicing.
I f citrus fruits are being used, remove the skin prior
to juicing.
to a size that will fit down the juicer's food chute.
the juicer lid.
vegetables have gone through the juicer. Do not press the
food pusher rapidly as the juicer will not be as effective.
CAUTION: do not put your hand or any other
object in the food chute during operation.
directly into the juice cup and the pulp will be collected
in the pulp bin.
switch is set to the OFF position, the power is turned off
at the outlet and the juicer is unplugged. It is now safe to
disassemble the unit.
minutes. Required break before following use of the juicer
– 1 minute.
Hopper
Fig. 6
15