Table of Contents
Advertisement
2.2 UNPACKING
The POD HIU is supplied in 2 parts, the First Fix Kit and the main appliance. For further details on the First Fix Kit, refer to the
instructions enclosed in the kit
To unpackage the appliance:
1.
Remove the straps from the outside of the packaging.
2.
Lift off the outer sleeve.
3.
Remove the literature pack and store for future reference.
4.
Remove the front pad.
5.
Optional: Lift the appliance into the upright position, ensuring it sits on the cardboard base, to prevent damage to the pressure
relief out pipe and valve.
Care MUST be taken to support the appliance during lifting. This should be done by 2 people due to the weight of the
unit.
DO NOT LIFT THE APPLIANCE VIA THE CARDBOARD PACKAGING.
DO NOT SIT THE APPLIANCE ON THE BASE CONNECTIONS WITHOUT THE PACKAGING IN PLACE. THIS WILL RESULT
IN DAMAGE TO THE CONNECTION POINTS, PRV PIPE & HINGES.
6.
Remove the top pad packaging.
7.
Remove the rear packaging tray by sliding it out from under the bottom pad.
Care MUST be taken to ensure the appliance does not rock forwards or backwards.
8.
Check the appliance. It is now ready for lifting into position.
Packaging materials should be recycled in accordance with regional requirements.
2
4
Installation and Servicing
SECTION 2 - INSTALLATION
5
7
6
15
Advertisement
Table of Contents
