Advertisement
Quick Links
Advertisement
Related Manuals for Ideal Heating Halo
Summary of Contents for Ideal Heating Halo
- Page 1 For use with...
- Page 2 You can download Compatible with the following boilers: Logic Heat H, the Halo app on Google Play or the Apple app store. Logic Heat H IE, Logic System S, Logic System S IE, You will not have to pay to use the app.
-
Page 3: Kit Contents
A. KIT CONTENTS 1. Halo PRT display unit 2. PRT rear housing 3. Trim plate For use with For use with 4. Desk stand 5. Installation guide 6. User guide 7. 4x AA Batteries 8. Screws & Rawlplugs™... -
Page 4: Location Guidelines
B. LOCATION GUIDELINES The Halo Heat & System 2-Zone Extension uses wireless Zigbee communication from the Smart Interface to the Halo PRT up 1.2-1.5m to a maximum distance of 30 meters. Occasionally house constructions and materials can reduce this communication... -
Page 5: System Overview
C. SYSTEM OVERVIEW This is a simplified diagram of how the Halo units, Smart Wiring Centre and Smart Interface communicate. Some wiring and pipework has been omitted for clarity. Pipework TOP TIP: For a robust signal between units, where possible, ensure... - Page 6 If there are any concerns regarding signal strength and location of the wall mounted PRT it is advisable to pair the control and check the signal strength before fixing to the wall. 1. The Halo can be installed with or without the provided 2. If no trim plate is required, use the rear housing of the trim plate.
- Page 7 DESK MOUNTING THE HALO 1. The Halo has an integrated rear housing and desk stand. 2. Insert the 4 AA batteries provided into the front housing of the Halo. Pay close attention that the orientation of the batteries is as indicated in the housing.
- Page 8 Heat & System, and the system type, Two zone heating and hot water and Zone 1. 4. The Halo PRT screen will show “Pairing in Progress”, then “Synchronisation in Progress” and then “Pairing Complete” when the Halo PRT has successfully connected to the Smart Interface.
- Page 9 E. PAIRING OF THE HALO - ZONE 2 The Halo PRT controlling zone 2 will now need to be paired with the Smart Interface installed by the boiler. Ensure the Smart Interface is still in pairing mode with the Zigbee LED flashing red.
-
Page 10: Commissioning Checklist
Interface. Press Pair button again to exit “Identify” function. Zigbee LED on Smart Wiring Centre flashes green Halo is positioned in the homeowners chosen location if desk mounted. Check RSSI (Received Signal Strength Indication) of the Zigbee Target RSSI between 0 and -65... - Page 11 Interface. Press Pair button again to exit “Identify” function. Zigbee LED on Smart Wiring Centre flashes green Halo is positioned in the homeowners chosen location if desk mounted. Check RSSI (Received Signal Strength Indication) of the Zigbee Target RSSI between 0 and -65...
- Page 12 The full text of the EU declaration of conformity is available at the T: 01482 498660 following internet address idealheating.com E: enquiries@idealheating.com For more information and FAQs visit the Ideal Heating website idealheating.com UIN: 229178 A02 RF frequency: 2405 – 2480MHz Max.