Advertisement
Important: Pre-drill pilot holes through roof panel and rafters with 1/8" bit to prevent splitting.
38.
With panels positioned correctly, attach to rafters with 12 - 1 1/4" screws. Before attaching
screws pre-drill pilot hole with 1/8" bit to prevent rafters from splitting. Start screws 1" away from
edge of roof panel, then space screws approximatley 10" apart. Be sure to attach screws into center
of rafters as shown above.
39.
Locate short plywood roof panel 48" wide x 21 3/4" long plywood and position on rafters
tight against large roof panel. Position with same side overhang. Once positioned attach with
9 - 1 1/4" screws. Pre-drill pilot holes and drill into center of rafter. Start screws 1" from edge of
roof panel and space approximatley 10" apart.
40.
Locate Center Plywood Roof Panel 4' wide x 53 3/4" long. Place Center Roof Panel on rafters
tight to previous two panels. Secure center roof panel with 6 - 1 1/4" screws as per Steps 38-39.
Toll Free 1-888-658-1658
Drill into center of rafter.
Start screws 1" from edge of roof panel.
www.outdoorlivingtoday.com
Page 21
Start screws 1" from edge of roof panel.
sales@outdoorlivingtoday.com
Advertisement
