Advertisement
30.
To complete Wall
Section, attach bottom 2x3
wall plates to plywood
floor with 20 - 2 1/2"
screws. Confirm Doorway
opening is 64" wide. Prior
to securing, make sure
wall panels are aligned
correctly on the floor.
Refer to Step 11. Wall
siding should overhang
floor while 2x3 wall plates
should sit flush with floor.
C. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
Small Plywood
for Roof (2)
Rear Soffits (2)
Facia/Roof
Nailing Strips (2)
Toll Free 1-888-658-1658
Optional - Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
Center Plywood for Roof
Front Soffits (2)
www.outdoorlivingtoday.com
Page 17
Use 64" long Door Stop / Floor
Threshold to confirm doorway opening.
Confirm
Doorway
opening is 64" wide
at top and bottom.
Pilot
Hole first.
Large Plywood
for Roof (2)
Rafters (7)
sales@outdoorlivingtoday.com
90° Metal
Brackets (8)
Rafter with Cleats
Attached
Advertisement
