Subscribe to Our Youtube Channel
Related Manuals for SWELLPRO SplashDrone 4
Summary of Contents for SWELLPRO SplashDrone 4
- Page 1 Firmware Update Guide Visit www.swellpro.com for the latest version of this manual and firmware updates for your drone and accessories. V1.0 – Oct. 2021...
-
Page 2: Thank You
With proper care and maintenance, you should enjoy your drone for many years. After flying in salt or contaminated water, always thoroughly rinse your SplashDrone 4 in freshwater immediately after use or before salt and sediment can dry inside moving parts. -
Page 3: Video Tutorials
Download the SDFly App Get the most from your SplashDrone 4 by flying with the SDFly app. This new, powerful mobile app enhances and optimizes the operation of the SplashDrone 4. Connected wirelessly to the SplashDrone 4 remote controller, the app allows logging, planning, recording of missions as well as the control and parameter setting of cameras and other modules in flight. - Page 4 ©2021 SwellPro All Rights Reserved...
-
Page 5: Table Of Contents
Content Thank You Using this Manual Video Tutorials Social Media Register Product Warranty Download the SDFly App Content SplashDrone 4 Firmware Update Guide Flight Control Firmware Updates Remote Control Firmware Updates Gimbal Firmware Updates ©2021 SwellPro All Rights Reserved... -
Page 6: Splashdrone 4 Firmware Update Guide
SplashDrone 4 Firmware Update Guide Welcome to the SwellPro product guide. In this guide, we are going to show you how to update the SplashDrone 4 flight control, remote control, and gimbal firmware. First, you need a laptop with an internet connection, the product you want to update the firmware with, a USB cable, and a hex screwdriver. -
Page 7: Flight Control Firmware Updates
Go to https://www.swellpro.com/splash-drone-4.html#download, click to download “SwellPro Firmware Update Tool” and “SplashDrone 4 Flight Control Firmware”. Unzip the “SwellPro Firmware Update Tool”, open “Shark Firmware V2”. Unzip the “SplashDrone 4 Flight Control Firmware”. Click the first line and select the flight control firmware. 2. Connect. - Page 8 Connect the aircraft and the laptop using the USB cable. Power on the aircraft. 3. Update. Click “Update”, the flight control will start to update. Please do not disconnect the USB cable during updates. ©2021 SwellPro All Rights Reserved...
- Page 9 “Firmware Information” to check if the firmware version is up-to-date. After finish the updates, install the cover back to the aircraft. Ensure the orange rubber ring is attached to the cover before installing. ©2021 SwellPro All Rights Reserved...
-
Page 10: Remote Control Firmware Updates
Go to https://www.swellpro.com/splash-drone-4.html#download, click to download “SwellPro Firmware Update Tool” and “SplashDrone 4 Remote Control Firmware”. Unzip the “SwellPro Firmware Update Tool”, open “Shark Firmware V2”. Unzip the “SplashDrone 4 Remote Control Firmware”. Click the first line and select the remote control firmware. 2. Connect. - Page 11 Click “Update”, the remote control will start to update. Please do not disconnect the USB cable during updates. When the bar shows 100% and changes from gray to white, the update process is complete. Release the power button. Disconnect the USB cable and ©2021 SwellPro All Rights Reserved...
- Page 12 You can reconnect the USB cable and click “Firmware Information” to check if the firmware version is up-to-date. After finish the updates, press the waterproof sealing back to the remote controller. ©2021 SwellPro All Rights Reserved...
-
Page 13: Gimbal Firmware Updates
Gimbal Firmware Updates 1. Download. Go to https://www.swellpro.com/splash-drone-4.html#download, click to download the corresponding gimbal firmware. We are using “GC3-S” in this video to demonstrate. Unzip the gimbal firmware file, open “Shark Firmware V2”. The gimbal firmware is already pre-selected. 2. Connect. - Page 14 Connect the gimbal to the laptop using the USB cable. Power on the aircraft. 3. Update. Click “Update”, the gimbal will start to update. Please do not disconnect the USB cable during updates. When the bar shows 100% and changes from gray to white, the update ©2021 SwellPro All Rights Reserved...
- Page 15 Disconnect the USB cable and restart the aircraft. After finish the updates, install the metal cover back to the gimbal. Ensure the orange rubber ring is attached to the cover before installing. ©2021 SwellPro All Rights Reserved...
- Page 16 If you need any support with your SwellPro product, please feel free to contact us. Version Information SwellPro products are constantly improving, so as the product user guides. It is recommended to visit www.swellpro.com to check and download the latest user guide.
Need help?
Do you have a question about the SplashDrone 4 and is the answer not in the manual?
Questions and answers