Vestil DLH-CL2-1 Instruction Manual

Vestil DLH-CL2-1 Instruction Manual

Carriage-mounted drum mover

Advertisement

Quick Links

Table of Contents
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If
the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply with laws,
regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Service:
If you have questions that are not addressed in these instructions and to order replacement parts, labels, and
accessories, call (260) 665-7586 and ask for the Service and Parts Department. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm.
Signal
Words.................................................................................................................................................................
Hazards.............................................................................................................................................................................
Using the Drum
Mover...............................................................................................................................
Record of Satisfactory
Condition..................................................................................................................
Inspections and
Maintenance.....................................................................................................................
Exploded View and Bill of
Specifications...........................................................................................................................................
Labeling
Diagram.....................................................................................................................................
Limited
Warranty......................................................................................................................................
Table of Contents
Carriage-Mounted Drum Mover: DLH-CL2-1
Instruction Manual
Materials..............................................................................................................
Copyright 2019 Vestil Manufacturing Corp.
Rev. 5/4/2020
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
http://www.vestilmfg.com/
Table of Contents
DLH-CL2-1 MANUAL
e-mail:
info@vestil.com
Page 1 of 7
2
2
3
4
4
5
6
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLH-CL2-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil DLH-CL2-1

  • Page 1 Fax: (260) 665-1339 http://www.vestilmfg.com/ e-mail: info@vestil.com Carriage-Mounted Drum Mover: DLH-CL2-1 Instruction Manual Receiving instructions: After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If the product is undamaged, discard the packaging.
  • Page 2 • DO NOT transport drums over rough terrain UNLESS they are secured to the lifter with a ratchet strap. • DO NOT modify the drum lifter in any way without first obtaining written approval from Vestil. Unapproved modifications automatically void the Limited Warranty (p.
  • Page 3 Tilt the fork truck mast forward. Slowly lower the forks until the drum gripper disengages the lip of the drum. The drum should be fully supported by the floor/ground. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 3 of 7...
  • Page 4 DO NOT use the product until it is restored to satisfactory condition. 3. Make a dated record of all repairs, adjustments, and replacements. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 4 of 7...
  • Page 5 Hex bolt, gr. A, z-plated, ”- 2.11 11003 45286 Hitch pin clip, #11, ”x2 ” ” Nylon lock nut, gr. 2, z-finish, 2.12 37018 40-145-008 Strap, ratchet, 6’long ”-20 Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 7...
  • Page 6 A: Label 287 – Applied to front of back plate B: Label 485 – Applied to front of back plate C: Label 1049 – Applied to front of back plate Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 7...
  • Page 7 The warranty period for original dynamic components is 90 days. For wearing parts, the warranty period is 90 days. Both warranty periods begin on the date Vestil ships the product to the Warrantee. If the product was purchased from an authorized distributor, the periods begin when the distributor ships the product.

Table of Contents