Miele PFD 101 Operating Instructions Manual page 54

Options
Setting "Start at"
With the Start at function, you set the
exact time at which you want the pro-
gram to start.
 Use the  sensor buttons to enter
the hour and confirm your entry with
OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensor buttons to enter
the minutes and confirm your entry
with OK.
The saved start time for the selected
program will appear in the display for
several minutes.
When the set time is reached, the pro-
gram selected will begin automatically.
The time left will appear in the display,
the  sensor button will go out, and
the Start sensor button will light up.
54
Setting "Finish at"
Use the Finish at function to set the lat-
est time by which the program selected
has to be finished.
 Use the  sensor buttons to enter
the hour and confirm your entry with
OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensor buttons to enter
the minutes and confirm your entry
with OK.
The estimated start time for the se-
lected program will appear in the dis-
play for several minutes.
A message will appear in the display if
the program cannot be completed by
the set finish time because the cycle
time is too long.
 If it appears, confirm the message
with OK.
The program will start automatically
when the estimated start time is
reached.
The time left will appear in the display,
the  sensor button will go out, and
the Start indicator light will light up.