Ecostart - Miele PFD 101 Operating Instructions Manual

Settings 

EcoStart

In order to run your dishwasher in the
most economical way, you can use the
EcoStart option to take advantage of
your electricity supplier's cheaper en-
ergy tariffs (see "Timer" under "Op-
tions").
With this option selected, your dish-
washer will start automatically at your
electricity supplier's cheapest rate
times.
To use this option, you must first set up
to 3 electricity-rate time zones in which
the dishwasher can start. You can allo-
cate different priorities to these time
zones. The time with the cheapest elec-
tricity rate will be given Priority 1.
Contact your energy provider to find out
the times of the cheapest electricity
rates.
Once the electricity-rate times have
been set, you can use the
tion to set the latest finish time required
for each program.
The dishwasher will then start automati-
cally during the cheapest electricity-rate
time period. The program will end at the
set finish time at the latest.
96
Setting the electricity-rate times
Before you can use the
you must set at least one electricity-rate
time.
 Use the  sensor buttons to select
The start of the electricity-rate time se-
lected will appear in the display and the
hour number block will be highlighted.
 Use the  sensor buttons to set
The end of the electricity-rate time se-
lected will appear in the display and the
hour number block will be highlighted.
 Use the  sensor buttons to set
The electricity-rate time will be saved
op-
EcoStart
and its priority will appear in the display.
 Use the  sensor buttons to set
 Confirm the message with OK.
The electricity-rate time will be acti-
vated.
an electricity-rate time T1–T3 and
confirm with OK.
the hours and minutes for the start
time and confirm both with OK.
the hours and minutes for the end
time and confirm both with OK.
the priority you want and confirm with
OK.
EcoStart option,