Table of Contents
Advertisement
Chapter 3
PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed the CPU itself uses when communicating with its
own special components. This section covers some very technical items
and it is strongly recommended that only experienced users should make
any changes to the default settings.
CMOS Setup Utility - Copyright(C) 1984-2000 Award Software
PnP OS Installed
Reset Configuration Data
Resources Controlled By
x
IRQ Resources
x
DMA Resources
PCI/VGA Palette Snoop
Assign IRQ for VGA
Assign IRQ for USB
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
PnP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for booting
(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operat-
ing system like Windows
the PnP cards. So, for non-PnP operating system (DOS, Netware
option must set to Yes.
PnP/PCI Configurations
No
Disabled
Auto (ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
95 or 98. When set to NO, BIOS will initialize all
®
3-26
Item Help
Menu Level
>
), this
®
Advertisement
Table of Contents
