Table of Contents
Advertisement
Chapter 3
Video Off Option
The settings are Always On, Suspend and All Modes. This option is for
choosing the setting in which the monitor will be turned off.
Always On
Suspend
All Modes
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to
Blank Screen
DPMS
Modem Use IRQ
This determines the IRQ which the MODEM can use. Settings: 3, 4, 5, 7, 9,
10, 11 and NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state. Settings: Delay 4 Sec, Instant-Off.
State After Power Failure
This option will determine how the system will power on after a power
failure.
CPU Fan In Suspend
Selecting On will enable the CPU Fan to stop after the system enters the
suspend mode. Settings: On, Off.
LED In Suspend
This item sets how the system uses Power LED on the case to indicate the
suspend/sleep state. Settings are:
Always turn on.
During Suspend mode, the monitor will be turned off.
The monitor is turned off during Doze, Standby or
Suspend mode.
turn off the vertical and horizontal synchroniza-
tion ports and write blanks to the video buffer.
This option only writes blanks to the video
buffer.
Initial display power management signaling.
3-22
Advertisement
Table of Contents
