Frigidaire PCFI3668AF Use & Care Manual page 8

Induction range
Hide thumbs Also See for PCFI3668AF:
Table of Contents

Advertisement

8
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR SER-
VICE AND MAINTENANCE
Do not repair or replace any part of the
appliance unless specifically recommended
in the manuals. All other servicing should
be done only by a qualified technician. This
reduces the risk of personal injury and dam-
age to the appliance.
Always contact your dealer, distributor, ser-
vice agent, or manufacturer about prob-
lems or conditions you do not understand.
Ask your dealer to recommend a qualified
technician and an authorized repair service.
Know how to disconnect the power to the
appliance at the circuit breaker or fuse box
in case of an emergency.
Remove the oven door from any unused
oven if it is to be stored or discarded.
Do not touch a hot oven light bulb with a
damp cloth. Doing so could cause the bulb
to break. Handle halogen lights (if pro-
vided) with paper towels or soft gloves.
Disconnect the appliance or shut off the
power to the appliance before removing
and replacing the bulb.
WARNING
California Residents: for cancer and
reproductive harm information, visit
www.P65Warnings.ca.gov
Important: This appliance has been tested
and found to comply with the limits for a
class B digital device, pursuant to Part 18 of
the FCC rules (United States) and ICES-001
(Canada). These limits are designed to pro-
vide reasonable protection against harmful
interference in a residential installation. This
unit uses and can radiate radio frequency
energy that may interfere with radio com-
munications if not installed and used in
accordance with the instructions manual.
However, there is no guarantee that inter-
ference will not occur in a particular instal-
lation. If this unit does cause interference to
radio or television reception, which can be
determined by turning the unit off and on,
the user is encouraged to try to correct the
interference by one or more of the follow-
ing measures:
• Reorient or relocate the receiving
antennae.
• Increase distance between unit and
receiver.
• Connect the unit into an outlet or a
circuit different from the one to which
the receiver is connected.

Advertisement

Table of Contents
loading

Table of Contents