Frigidaire PCFI3668AF Use & Care Manual page 19

Heating accelerator function
This function allows you to bring the cooking zone
to the selected power level more quickly than when
selecting the power level.
To activate the Heating accelerator function (the
example shows the front left cooking zone at level
3):
1. Press and hold a cooktop knob.
2. Keep the knob pressed and turn it
counterclockwise to position
until the symbol appears on the
corresponding cooking zone display (a beep
will be emitted).
3. Keep the knob pressed and select the
required power level within 3 seconds. The
corresponding cooking zone display will
show and the selected power level
number alternating.
IMPORTANT
Once the selected power level is reached, the
Heating accelerator function will be deactivated
(the symbol will disappear) and the power
level will remain the selected one.
You can increase the power level at any time. The
"acceleration" time frame will be modified
automatically. To deactivate the Heating
acceleration function, simply bring the knob to the
OFF position or select a lower power level.
Bridge function
• This function is only available for the cook-
ing zones marked with "BRIDGE" (1 - 2 and 4
- 5). All the other zone combinations are not
allowed.
• With the bridge function activated, is it not
possible to activate Boost mode.
or
The bridge function allows you to control two cook-
ing zones simultaneously. This function is useful
when cooking with oblong cookware such as roast-
ing pans or fish kettles, or when cooking with two
pans at the same time.
To activate the Bridge function:
1. Press and hold turn the front / rear left or
right knobs counterclockwise to the
positions (a short beep will be emitted):
2. Release the knobs.
USING THE COOKTOP
IMPORTANT
19