Advertisement
Refer to the user manual of your TV for the correct mounting material.
3. Loosen the pre-attached bolts Ⓒ with the allen key Ⓞ.
4. Remove both thumbnuts Ⓟ from the interface bars Ⓑ.
5. Slide the lower interface bar Ⓑ through the designated spacing of the interface clips Ⓒ. Make sure the interface bar Ⓑ
is placed in a centered position. Notice the holes on the side of this interface bar Ⓑ. They need to face downwards.
6. Slide the upper interface bar Ⓑ through the designated spacing of the interface clips Ⓒ. Make sure this interface bar Ⓑ
is also placed in a centered position.
7. Attach both interface bars Ⓑ to the strips by tightening the pre-attached bolts Ⓒ with the allen key Ⓞ.
8. Screw the thumbnut Ⓟ into the upper bar. Make sure you don't screw it in completely, yet.
9. Click the clip covers Ⓠ onto the clips.
TVM 3460/3660 Series English
6
Advertisement
