Installing The Software - Canon FB330P/FB630P Product Manual

Caere OmniPage Limited Edition (Approximately 18 MB)
An optical character recognition (OCR) program that works with
CanoCraft CS-P to scan and load documents, which can then be converted
into text data for editing. The scanning functions are only available if
CanoCraft CS-P is installed.
Adobe Acrobat Reader (Approximately 10 MB)
The reader program for the on-screen software manuals contained on the
CD-ROM.
• Installation of the above programs requires approximately 144 megabytes
WARNING
on your hard disk.
• Please refer to the Troubleshooting section of this guide if you experience
difficulty in installing the software
• Software descriptions are contained in the Guide to the Software section
NOTE
of the Getting Started guide, starting on page 23.
.

Installing the Software

• Do not remove the CD-ROM from its drive or power the scanner down
WARNING
during installation of the software unless prompted by an on-screen
message of CanoScan Setup Utility.
(p. 61).
33