CHeCKs BefORe PuRCHasIng Before purchasing the hood and before installing it, check the Electrical connection (qualified electrician’s evacuation tube, 150 mm [Ø5.91 in.] in diameter (nOT supplied) following conditions, necessary for the correct installation, inspection) operation and maintenance of the hood. The equipment is supplied with the power cable already in- Transport (Owner’s inspection) stalled that can be connected to the Caravaggio oven ter-...
Page 4
Checks before purchasing Smoke evacuation (Owner’s inspection) The oven is fitted with an adjustable exhaust in the top to get rid of the steam from the cooking chamber. This steam, together with the one from the door during must be conveyed outside the work phases, through the hood.
HOOD TeCHnICal DaTa KCR535AS Units of KCR535NT KCR535 (with measurement (neutral) extraction fan) a Oven supply input B equipotential Power supply Volt aC 230 aC 230 C Circuit-breaker (only for american market) (50/60 Hz) D Hood supply input Maximum 0.0072 0.13 e Oven smoke exhaust absorption...
Page 6
CARAVAGGIO hood technical data Fan technical data Characteristic curves - acoustic features [mmcda] [Pa] : flow in m : static pressure in mmcda and Pa - P: Incoming power in W - sfP: specific power factor in W/m /s (blue curves) Compliance data with IsO 5810 Sound pressure level* (dB(A)) Extraction...
InsTallaTIOn Safety instructions Symbols used in the manual and on • Persons not involved with the appliance installation may not pass through or stand in the the labels applied to the machine • Read this guide carefully before installing the work area during appliance assembly. appliance, and keep it with care in an accessible Indicates that caution is required when performing • The serial plate provides important technical...
Installation Transport fig.4. fig.5. Fig.4. fitted with personal protection equipment, transport the appli- ance to the installation location. use suitable equipment, capable of dealing with its weight: persons not involved with the appliance installation may not pass through or stand in the work area during the appliance assembly.
Installation 37 kg (81,5 lb) KCR535 NT 600 mm. 42 kg (92,5lb) KCR535 AS (24 in. ) 44 kg (97 lb) KCR835 NT 49 kg (108 lb) KCR835 AS fig.7. Positioning and connection to the fig.8. oven below only The hoods can be positioned on a Caravaggio oven.
Page 16
Installation Fig.9. fig.9. exclu- The electrical connection must be carried out sively by qualified personnel after reading the safety warnings at the beginning of the manual. check that the systems Before connecting the hood the oven is connected to comply with the current regulations in the country of use.
Installation Smoke extraction The oven is fitted with an adjustable exhaust in the top to get rid of the steam from the cooking chamber. This steam, together with the one from the door during the must be conveyed outside work phases, through the hood.
Installation Pre-testing and final inspection √ Positioning checks Reference chapter on page... Before delivery to the customer, the hood is checked and Preliminary operations Has the protective film been removed from the surfaces? on page tested in the Manufacturer's factories. Positioning and connection to the Is the equipment perfectly bound to the underlying oven? The “production process check sheet”...
Page 22
CuPPOne 1963 Cuppone f.lli s.r.l. Via sile, 36 31057 silea (TV) - ITalY T +39 0422 361143 f +39 0422 360993 info@cuppone.com - www.cuppone.com...
Need help?
Do you have a question about the Caravaggio KCR535 and is the answer not in the manual?
Questions and answers