Advertisement
GB
GE/FO040411
Made for preparing panels for automatic emergency
intervention.
This carries out the function of control and drive
of a generating set and connects the power users
to the mains or the generator.
Possibility of connecting CAN Bus with engine equipped
with control unit for electronic control of the injection system.
It shows the main parameters of the generating set
on the display.
Complete with 26 instruments
Texts in:
Italian
English
French
German
Spanish
Portuguese
AUTOMATIC GENERATING SET
AUTOMATIC GENERATING SET
CONTROL UNIT
CONTROL UNIT
TYPE CAM-685
TYPE CAM-685
(synchronous reading of 6
).
®
Advertisement
Table of Contents
Related Manuals for ELCOS CAM-685
Summary of Contents for ELCOS CAM-685
- Page 1 GE/FO040411 AUTOMATIC GENERATING SET AUTOMATIC GENERATING SET CONTROL UNIT CONTROL UNIT TYPE CAM-685 TYPE CAM-685 Made for preparing panels for automatic emergency intervention. This carries out the function of control and drive of a generating set and connects the power users to the mains or the generator.
- Page 2 CONNECTIONS AND FUNCTIONS OF CENTRAL UNIT CAM-685 FUNCTIONS MODEM GSM Possibility of displaying the control CELL unit instruments with a mobile phone operating the starting and stopping and notifying with an SMS message when the generating set is in alarm state.
- Page 3 • MULTIPOINT CONNECTION. With the multipoint connection a small network is created in which it is possible to connect a maximum of 8 Elcos control units (CAM-685 CAM-120). All the control units are monitored by the remote control software ZW-100.
- Page 4 ÷ 32 VDC Degree of protection • FRONT IP64 • REAR IP00 Dimensions (LxHxP)mm 290 x 200 x 62 ® Strada Naviglio Alto,24/A 43122 PARMA (ITALY) - Tel. +39 0521 772021 / Fax +39 0521 270218 www.elcos.it e-mail: info@elcos.it...
Need help?
Do you have a question about the CAM-685 and is the answer not in the manual?
Questions and answers