13 Technical Data; Noise And Vibration Information; Ds70 - Wacker Neuson DS70 Operator's Manual

13 Technical data

13 Technical data
13.1

Noise and vibration information

The noise and vibration information listed was determined in accordance with the following directives for
typical machine operating conditions/special trial conditions and applying harmonized standards:
Machinery Directive 2006/42/EC

Noise Emission Directive 2000/14/EC

In operation, values differing from these may arise, depending on the operating conditions prevailing.
13.1.1 Noise information
Sound pressure level at the place of use
LpA was determined in accordance with EN ISO 11201 and EN 500-4.

Guaranteed sound output level
LWA was determined in accordance with EN ISO 3744 and EN 500-4.

13.1.2 Hand-Arm-Vibration (HAV) information
Weighted total vibration
HAV was determined in accordance with EN ISO 20643 and EN 500-4.

13.2

DS70

Designation
Part no.
Impact rate
Impact force
Advance
Length
Width
Height
Length (rammer shoe)
Width (rammer shoe)
Weight
Operating output
Operating speed*
Standard
Operating temperature range
Sound pressure level L
Sound output level L
measured
guaranteed
Total vibration value a
Measuring uncertainty of the
total vibration value a
Oil specification
Oil volume
*
Dependent on operating parameters, material properties and environmental factors.
34
Unit
per
minute
kN
m/min
mm
mm
mm
mm
mm
kg
kW
rpm
°C
dB(A)
pA
WA
dB(A)
dB(A)
2
m/s
hv
2
m/s
hv
l
DS70Y 13"
5100030612
667
21
8,8
740
370
1,000
340
330
83
3.1
3,450
ISO 3046-1
-10 – +40
94
107
108
11.9
1.5
SAE 10W-40
0.8
100_0201_td_0005.fm