GoFit GF-ECS Assembly Instructions

Elevated chin up station

Hide thumbs Also See for GF-ECS:

Download this manual

Parts visual references

For questions or missing parts, please contact GoFit at 888-530-4441

ELEVATED CHIN UP STATION

ASSEMBLY INSTRUCTIONS

Tools required:

Parts

-Adjustable Wrench

HOLES ALLOW FOR

THREE HEIGHT OPTIONS

Prior to assembly, confirm that

all parts are included in the box:

-2 Side Bars (C-shaped)

-1 Curved Bar (2 halves)

-1 Straight Bar (2 halves)

-1 Leverage Bar

-2 Eyebolts

-2 Self-seating Bolts

-2 Long Hex Bolts

-2 Short Hex Bolts

-8 Lock Washers

-8 Lock Nuts

-1 Door Molding Wedge

(32 Total Pieces)

Need help?

Do you have a question about the GF-ECS and is the answer not in the manual?

Page 1 -2 Eyebolts -2 Self-seating Bolts -2 Long Hex Bolts -2 Short Hex Bolts -8 Lock Washers -8 Lock Nuts -1 Door Molding Wedge (32 Total Pieces) For questions or missing parts, please contact GoFit at 888-530-4441 ©2017 GOFIT, L.L.C. TULSA, OK...
Page 2 Curved Bar. Place Lock Washer on Bolt; Curved Bar with holes in Side Bars; thread on Lock Nut. Finger-tighten. thread on Lock Nut. Finger-tighten. slide Eye Bolts through holes as shown. For questions or missing parts, please contact GoFit at 888-530-4441 ©2017 GOFIT, L.L.C. TULSA, OK...
Page 3 Leverage Bar securely the two side door frame moldings. frame molding on other side of doorway. rests on top of door frame molding. For questions or missing parts, please contact GoFit at 888-530-4441 ©2017 GOFIT, L.L.C. TULSA, OK...
Page 4 Wedge helps keep the Leverage Bar resting on the door frame/molding. Before each exercise, always check that the Leverage bar is resting on the door frame/molding. For questions or missing parts, please contact GoFit at 888-530-4441 ©2017 GOFIT, L.L.C. TULSA, OK...