Notes On Normal Handling - Canon DR-3080CII Startup Manual

Notes on Normal Handling

WARNING
To avoid fire and electric shock, always observe the following
warnings when using this scanner.
■ Do not place flammable chemicals, such as alcohol or paint thinner, near
the scanner.
■ Do not cut, damage, or modify the power cord. Do not place heavy objects
on the power cord, do not pull on the power cord, and do not bend the
power cord sharply.
■ Do not plug in or unplug the power cord with wet hands.
■ Do not use multi-outlet adapters to connect multiple devices to one outlet.
■ Do not tie up or bundle the power cord. Push the plug in as far as it will go
when plugging in the power cord.
■ Only use the power cord that was provided with this scanner.
■ Do not attempt to disassemble or modify this scanner.
■ Do not use flammable sprays near this scanner.
■ Always turn the scanner off and unplug the power cord before cleaning this
scanner.
■ To clean this scanner, dampen a cloth in a mild detergent solution and then
wring the cloth out thoroughly. Do not use flammable liquids to clean the
scanner, including alcohol, benzene, or paint thinner.
■ If the scanner ever makes a strange noise, emits smoke or a strange odor, or
becomes hot, or if the scanner does not operate at all even though the
power is on, immediately turn the scanner off and unplug the power cord.
Contact your local authorized Canon dealer or service representative to
have the scanner serviced.
■ Do not drop, kick, or otherwise strike the scanner. If the scanner does
somehow become damaged, immediately turn the scanner off and unplug
the power cord. Contact your local authorized Canon dealer or service
representative to have the scanner serviced.
■ Always turn the scanner off and unplug the power cord before moving the
scanner.
Before Using the Scanner
7