Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Scanner
  5. imageFORMULA DR-3080CII
  6. Easy start manual

Canon imageFORMULA DR-3080CII Easy Start Manual

Hide thumbs Also See for imageFORMULA DR-3080CII:
1
2

Advertisement

Quick Links

Download this manual See also: Maintenance Manual
Original version
Document Scanner DR-3080CII
Easy Start Guide
Thank you for purchasing the Canon DR-3080CII Document Scanner.
This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the
procedures outlined in this Easy Start Guide to set up the scanner. Details on using the
scanner are described in the User’s Guide packaged with the scanner. Before you start using
the scanner, make sure to thoroughly read the User’s Guide.

Checking the Package Contents

When you unpack your scanner, make sure all of the following accessories are included.
If any of the items listed below are missing or damaged, contact your local authorized Canon
dealer or service representative.
USB Cable
Power Cord
DR-3080CII Scanner
Easy Start Guide
User’s Guide
Auxiliary Paper
Document Eject Guide
(This Manual)
Support Plate
The DR-3080CII Setup Disc is
inserted in the User's Guide.
DR-3080CII
Quick Reference Guide
Adobe Acrobat
Setup Disc
Setup Disc
0880281099-L5T1P7-BR01
C A N O N
C A N A D A
I N C .
6 3 9 0
D I X I E
R D
M I S S I S S A U G A
O N
L 5 T
9 Z 9
Registration Card
Warranty Card
Shading Sheet
(U.S.A and Canada only)
(U.S.A and Canada only)
Note
The DR-3080CII Setup Disc contains the Softwares (DR-3080CII Scanner Driver
and CapturePerfect3.0) and PDF manuals. For details, refer to “About the Setup
Disc” on page 16 of the User’s Guide.
Items included in this package are subject to change without notice.
Keep the package and packing materials for storing or transporting the scanner.
After checking the package contents, you need to remove all the
packing materials protecting the scanner. (
STEP2)
Removing the Packing Materials
After unpacking the scanner, perform the following steps to remove all the orange
tape and protective materials from it.
1.
Peel off all the orange tape from the outer casing.
2.
Carefully open the document feed tray.
Document Feed Tray
Trademarks
• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or
registered trademarks in other countries.
• Microsoft Windows
®
is a registered trademark of Microsoft USA in the United States and other countries.
• Other brands and product names used in this manual may be trademarks or registered trademarks of their respective
companies.
PUB. CE-IE-519
©2006 CANON ELECTRONICS INC.
3 .
Peel off the orange tape from all the places marked
below.
4 .
Peel off the orange tape indicated by the
mark, and carefully open the upper
unit.
Upper Unit
5.
Remove the protective sheet.
6.
Gently close the upper unit. Make sure the upper unit is closed securely by
pressing down on it until you hear it click into place.
The scanner is now ready for use.
Next, you need to install the scanner software. (
STEP3)

Installing the Software

Install the software before connecting the scanner to the computer.
Warning
Do not connect the scanner to the computer before installing the software.
In a Windows 98SE/Me/2000/XP environment, if you connect the scanner and
turn it ON before you install the software, a wizard screen will appear.
If this wizard appears, click [Cancel] to exit the wizard, and then turn the
scanner OFF.
Wizard Screen (Windows 2000)
Close all other applications before installing the software.
1.
Log on to Windows.
Be sure to log on with Administrator privileges
when logging on to Windows NT/2000/XP.
2.
Insert the DR-3080CII Setup Disc into the
computer’s CD-ROM drive.
The setup wizard automatically starts up when
you insert the CD-ROM into the CD-ROM
drive. If the setup wizard does not start up, run
the setup.exe application on the CD-ROM.
3.
Click [Typical Installation].
[Typical Installation] installs all of the software.
If you want to select which parts of the
software to install, click [Custom Installation].
4.
Click [Install].
All of the currently displayed software is
installed. To install only selected software,
click [Back] and select [Custom Installation].
5.
Click [Next].
6.
Read the software license agreement, and click
[Yes] if you consent to its conditions.
Installation of the scanner driver starts.
7.
Click [Finish] to complete the installation.
Next, the installation wizard for CapturePerfect
3.0 appears.
8.
Click [Next].
9.
Read the software license agreement, and click
[Yes] if you consent to its conditions.
10.
Check the destination folder for the installation,
and click [Next].
Installation of CapturePerfect 3.0 starts.
11.
Click [Finish] to complete the installation of
CapturePerfect 3.0.
12.
When all installations are complete, the
installation completed screen appears.
Click [Exit] to exit the installer. Click [Back] to
return to the menu screen.
This completes the software installation.
Next, you need to connect the scanner to your computer. (
STEP4)
Continued on back side

Advertisement

loading

Related Manuals for Canon imageFORMULA DR-3080CII

Summary of Contents for Canon imageFORMULA DR-3080CII

  • Page 1: Checking The Package Contents

    Carefully open the document feed tray. Document Feed Tray Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • Microsoft Windows ®...

  • Page 2: Connecting The Scanner To Your Pc

    For Windows XP, a balloon help pop-up appears when installation is finished. The installation finished message does not appear in Windows 98SE/Me/2000. The scanner is registered on the computer as “CANON DR-3080CII USB” (or “CANON DR-3080CII SCSI”) in the “Imaging Device” directory of the Device Manager.

This manual is also suitable for:

3080cii - dr - document scanner