Table of Contents
Advertisement
L.5.4
Suspend the product on the support bracket and attach the bottom
isolators
The following tools and fittings as listed in Table L-4 and as shown in Figure L-12 are
required in order to suspend the product to the support bracket and attach the bottom
isolators.
Table L-4: Bottom isolators tools and fittings
Item No.
KAN03010
KAN02009
KAN03012
KAN05026
MECH09025
MECH00249
Lift the product and place it over the top four isolators (MECH09025) by positioning the
four holes over the four isolator threads as shown in Figure L-13.
Note: The left and right brackets each weigh 2 Kg (4.5 lb) giving the product a
Figure L-13: The product positioned over the isolators
MA-005 - Minitrans Installation Manual - Rev 4.5
Description
Qty
10 mm nut spinner
5 mm Allen key
10 mm spanner
M6 flat washers
6
M6 nuts
6
M6 spring washers
6
Large flat washers
6
Isolators
2
O rings (7.1 x 1.6)
2
combined total weight of 34.5 Kg (76 lb), so it is important to take
precautions prior to lifting. As such, the product shall be lifted into
position using sufficient personnel or mechanical means in accordance
with local regulations and company policies.
Figure L-12: Bottom isolators tools and fittings
13-Aug-20
Page 60 of 86
Advertisement
Table of Contents
