Table of Contents
Advertisement
▪
All pipe fittings should be tight and all threaded pipe fittings tightly wrapped with
PTFE tape with a light coating of PTFE paste or other quality pipe thread sealant
applied over the taped male threads to prevent leaks. Both of these items are
included in the product installation kit.
or three wraps for large pipe fittings.
Figure 8-11 depicts the proper arrangement of the Return Assembly.
Figure 8-11: Bleed assembly on threaded-type oil return valve
MA-005 - Minitrans Installation Manual - Rev 4.5
Note: GE recommends two wraps of PTFE tape
13-Aug-20
Page 28 of 86
Advertisement
Table of Contents
