Search Tab; Upgrade Tab - Idis DC-D4511WERX Configuration Manual

DC-D4511WERX, DC-D4531WERX Configuration Guide for IDIS NVR

Search Tab

IP configuration can be done on this tab. Simply click the camera and change IP setting by changing values
in the bottom field.
Manual and DHCP settings are available for this camera. By default, it is set to 192.168.1.168 when it is in
static mode.
Note: Batch IP setup is not supported. When multiple cameras are being set up for the first time, it has to be
set up one by one by accessing 192.168.1.168

Upgrade Tab

Upgrade for a device or multiple devices are available on this tab.
The latest firmware version is available at
1. Select Camera from the device list and select firmware file on the bottom.
2. Enter login detail on the bottom field and click Upgrade
www.idisglobal.com
Version 1.0.0
18