Table of Contents
Advertisement
13.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
Figure 1.41: System panel connector
Notes
The sytem panel connector is color-coded for easy connection.
Refer to the connector description below for details.
•
Power/Soft-off button (Black 2-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-
OFF mode depending on the BIOS settings. Pressing the power
switch for more than four seconds while the system is ON turns the
system OFF.
•
System Power LED connector (2-pin PWRLED)
This 2-pin connector is for the system power LED. The system
power LED lights up when you turn on the system power, and
blinks when the system is in sleep mode.
•
Reset button (Blue 2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
•
Hard disk drive activity (Red 2-pin IDELED)
This 2-pin connector is for the HDD Activity LED. Connect the
HDD Activity LED cable to this connector. The IDE LED lights up
or flashes when data is read from or written to the HDD.
43
Chapter 1 Product Introduction
Advertisement
Table of Contents
