Table of Contents
Advertisement
10.
USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the optional USB mod-
ule cable to any of these connectors, then install the module to a slot
opening at the back of the system chassis. These USB connectors comply
with USB 2.0 specification that supports up to 480 Mbps connection
speed.
11.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC '97 audio standard.
Figure 1.39: Front panel audio connector
Figure 1.38: USB connectors
41
Chapter 1 Product Introduction
Advertisement
Table of Contents
