Advertisement
RS232 output port
This display has RS232-C output port facilitating user to print out the measuring result
or connect it to a computer; the port's picture is as below.
The display's RS232 output port transmission parameters are:
RAUD RATE : 57600/19200/9600/4800/2400/1200bps
DATA
STOP BITS : 1 stop bit
Through the display's RS232 output port, we can output display data to a computer or
send the output or reset command to display from the computer; such as asking axis X
to reset CX, axis Y to reset CY and axis Z to reset CZ.
RS232 output function
Q
User may select EPSON LQ-300+RS232 as the working printer; set speed to 19200bps
and turn on the print to standby.
RS-232C output Interface
Pin location Function
T X D
2
R X D
3
G N D
5
: 8 data bits
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
Print
Press
Press
to output display
to output display
data; and set the "print" option to
data; and set the "print" option to
"on" ; to apply two-way
"on" ; to apply two-way
communication, set the "print"
communication, set the "print"
option to off.
option to off.
Advertisement
