Advertisement
3) point measurement function
purpose: to measurement a point and store the
measured point into the ES-9Q's
memory.
1. Press the
key to enter into
two points to construct a line function
Q
2. located the cross hair center to the measured point, press
A
3. After operator viewed the point feature's parameters, operator can store this point feature into the
memory of ES-9Q as per following procedure.
press
key to store the feature into the memory
Store
8.560
5.420
Q
There are 100 feature memory available in ES-9Q, they are feature 0-99 respectively, in this example, we
are going to store this point parameters as feature 07, procedure are as follows
8.560
5.420
Q
point measurement function
Polar
Store
R/D
Recall
Print
XY
Enter
FI N I S H
X coordinate
Y coordinate
RESULT
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
SEL 0-99
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
Enter
to enter the point.
8.560
5.420
Q
Store
Enter
- 17 -
A
message window displays
requesting enter the point
Q
RESULT
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
ES-9Q asking the feature memory
location to be stored.
8.560
5.420
Q
enter the feature memory
location. then the point parameters
are store into memory location
as feature 07.
ENT PT
ENT PT.
Polar
Store
R/D
Recall
Print
XY
Enter
FI N I S H
Enter
SEL 0-99
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
Advertisement
