Advertisement
2. We have already stored three point features or circle features in ES-9Q's memory, we can use the
key to recall the stored feature for circle calculation. In the example below, we already have
feature 02, feature 03 & feature 04 stored in the ES-9Q memory.
Q
Q
Q
3. Features input completed, ES-9Q will display centre position and the Diameter/Radius of the circle.
X, Y centre coordinate
press
R/D
Diameter/Radius display
4. After operator viewed the circle feature's parameters ( centre and Dia/Rad ), operator can store this circle
feature into the memory of ES-9Q as per following procedure.
press
key to store the feature into the memory
Store
Q
3 points to construct a circle function
POINT 1
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
POINT 2
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
POINT 3
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
Polar
Store
R/D
Recall
Print
XY
Enter
FI N I S H
Enter
Recall
Enter
Recall
Enter
Recall
4.654
RESULT
Polar
Store
R/D
Recall
XY
-1.072
3.985
Q
Store
- 13 -
recall the feature 02 as the
first point on the circle.
recall the feature 03 as the
second point on the circle.
recall the feature 04 as the
third point on the circle.
press
to scroll between center position
Print
and Diameter/Radius displays
In the Dia/Rad display mode,
Enter
press
to swap
R/D
FI N I S H
between Diameter/Radius
ES-9Q asking the feature memory
location to be stored.
4.654
-1.072
3.985
Q
SEL 0-99
Polar
Store
R/D
Recall
Print
XY
Enter
FI N I S H
Advertisement
