Advertisement
four points to construct intersection point and angle
intersection point
XY coordinates
7. After operator viewed the intersection point parameters ( coordinate and angle ), operator can store this
point feature into the memory of ES-9Q as per following procedure.
press
key to store the feature into the memory
Store
15.847
-1.531
59.58.20
Q
There are 100 feature memory available in ES-9Q, they are feature 0-99 respectively, in this example, we
are going to store this point parameters as feature 08, procedure are as follows
15.847
-1.531
59.58.20
Q
After the four points to construct intersection point and angle measurement, the INC coordinate of
the ES-9Q will be preset to the intersection point of line 1 & 2, operator move to 0.000 in INC
coordinate, then this is the intersection point of the line 1 & 2..
15.847
CROSS PT
CROSS PT
Polar
Store
Recall
R/D
Print
XY
-1.531
Q
FI N I S H
RESULT
Polar
Store
R/D
Print
Recall
XY
Enter
FI N I S H
SEL 0-99
Polar
Store
Recall
R/D
Print
XY
Enter
FI N I S H
2-axes display
over angle
supplmnty
anglel
Enter
Store
enter the feature memory
Enter
location. then the point parameters
are store into memory location
as feature 08.
- 21 -
59.58.20
ANGLE
Polar
Store
XY
120.01.40
Q
ES-9Q asking the feature memory
location to be stored.
15.847
SEL 0-99
Polar
Store
R/D
Recall
XY
-1.531
59.58.20
Q
Recall
R/D
Print
Enter
FI N I S H
Print
Enter
FI N I S H
Advertisement
