Compliance; Unpacking Procedure - Honeywell Pro-Watch 6000 Installation Manual

Notices

Compliance

Compliance
To obtain applicable EU compliance Declaration of Conformities for this product,
please refer to our website,
http://www.security.honeywell.com/hsce/international/index.html. For any additional
information regarding the compliance of this product to any EU-specific
requirements, please contact:
Honeywell Security & Communications
Honeywell Security - Quality Assurance Dept., Newhouse Industrial Estate
Motherwell
Lanarkshire ML1 5SB
Scotland
United Kingdom
Tel: +44)0) 1698 738200
Email: UK64Sales@Honeywell.com

Unpacking Procedure

Caution:
If any damage to the shipment is noticed before unpacking, a claim must be filed with
the commercial carrier.
All containers should be opened and unpacked carefully in order to prevent damage to
the contents.
The following steps are used to unpack equipment in preparation for installation:
1. Open the container and remove the unit(s) and all packing material. Retain the
2. Inspect the contents for shortage. If items are missing items, contact the order
3. Visually check contents. If damage is discovered, perform the following:
If shipping caused damage to the unit, a claim must be filed with the commercial
carrier.
If any other defect is apparent, call for a return authorization.
viii
container and all packing materials. They may be used again for reshipment of
the equipment, if needed.
entry department at 800-323-4576.
www.honeywell.com