Operation
Interrupting and resuming a
cooking process
You can interrupt a cooking process
(and resume it) at any time.
Open the door during the cooking
process or select the /C sensor
control.
The cooking process is interrupted and
the cooking duration is paused.
To resume the cooking process, close
the door and select the
sensor control.
The cooking process resumes and the
cooking duration continues to count
down.
Canceling a cooking process
Press the /C sensor control twice
in a row.
Automatic keeping warm
function –
At the end of a cooking process at
microwave power level (450 W) or
higher, the automatic keeping warm
function will switch on automatically
if the door remains closed and no
sensor controls are pressed.
This will happen after approx. 2 minutes
and will keep the food warm for up to
15 minutes by using microwave power
level (80 W). The appliance will emit
an audible signal after 5, 10, and
15 minutes.
, W, and (Heat and Hold)
appear on the display.
40
You can adjust this function with the
setting.
The automatic keeping warm function
cannot be combined with the Popcorn
and Reheat drinks functions.
Oven compartment query –
Operating the microwave oven while
empty can damage it.
Make sure that some food has
actually been placed inside the oven
before starting a cooking process.
The message appears to remind
you that the microwave oven must not
be used without any food inside it.
If you attempt to start a cooking
process without opening the door first,
the message will appear on the
display.
There may not be any food inside the
oven, given that you have not opened
the door for a long time (approx.
20 minutes).
Open and close the door, and then
select the sensor control.
You can adjust this function with the
setting.