Table of Contents
Advertisement
Technical safety
This appliance must be installed and connected in compliance
with the installation instructions.
Unauthorized installation, maintenance, and repairs can cause
considerable danger for the user. Installation, maintenance, and
repairs should only be carried out by a Miele authorized technician.
Maintenance by the user: Never repair or replace any part of the
appliance unless the instructions specifically recommend doing so.
Service work should only be performed by a qualified technician.
Damage to the microwave oven can compromise your safety.
Check the microwave oven for visible signs of damage. Do not use a
damaged microwave oven.
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronized
with the grid power supply (e.g., island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN 50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronized with the grid power supply, or these measures must be
replaced by equivalent measures in the installation. As described, for
example, in the current version of VDE-AR-E 2510-2.
Operating a damaged microwave oven can result in microwave
leakage and present a hazard to the user. Do not use the microwave
oven if:
- The door is warped.
- The door hinges are loose.
- Holes or cracks are visible in the casing, the door, or the oven
compartment walls.
IMPORTANT SAFETY INSTRUCTIONS
7
Advertisement
Table of Contents
