Related Manuals for Miele M8260-1
Summary of Contents for Miele M8260-1
-
Page 1: Installation Instructions
Installation Instructions M8260-1 en-CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. -
Page 2: Electrical Connection
Electrical connection Power supply CAUTION: Before servicing, The microwave comes equipped with a disconnect the power supply by power cord with a molded plug ready either removing the fuse, shutting off for connection to a: the power main or manually "tripping"... -
Page 3: Building-In Dimensions
Installation Building-in dimensions When building in the appliance, ensure that the vents located at the Tall cabinet front of the appliance are not blocked, and that there is adequate ventilation to the rear of the unit (see illustrations). Do not cover or block any openings on the appliance. -
Page 4: Installation
Position the fitting bracket on the center line. Use the mark on the bracket as a guide. Mark the center line of the cabinet. Miele appliances can be installed flush or proud. Discuss your installation requirements with you architect, designer and installer. - Page 5 Installation ^ Fit a screw a in to the center of the first long hole. ^ Check the alignment of the unit, then fit another screw a into the other long hole. ^ Tighten both screws. ^ Place the appliance in the niche. Using both hands on the back of the microwave interior move it into place.
- Page 6 Alteration rights reserved / 0909 M.-Nr. 07 372 781 / 00 For the most updated manual see the Miele web site.