How To Select A Presentation Mode - Furuno FSV-30 Operator's Manual

2. HORIZONTAL MODE
2.13.2

How to select a presentation mode

1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
4. Select PRESENTATION MODE and press the [MENU] key to open the
dialog box.
5. Select presentation mode desired and press the [MENU] key.
6. Select QUIT and press the [MENU] key.
7. Select QUIT at the top of the menu screen and press the [MENU] key to quit
all menus.
Note: The true motion display range may be set to 1.3 or 1.6 times the range
with TM DISPLAY RANGE on the DISPLAY SETTING sub menu.
2-30
MENU
OTHERS
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION : MODE KEY
H2 DISPLAY : PORTRAIT
TRANSPONDER : OFF
PRESENTATION MODE : HEAD UP
TM DISPLAY RANGE : 1.6R
BEARING REF : SHIP HEADING
TILT LEVER : TILT
H-SLICE WIDTH : 16
H-SLICE PICT ADVC : KP SYNC
NET COURSE MARK : ENTER
MANUAL DEGAUSS : EXECUTE
AUTO DEGAUSS : INT SENSOR
DIMMER : 10
KEY BEEP VOLUME : 5
DISPLAY SETUP menu
QUIT
CANCEL
HEAD UP
NORTH UP
COURSE UP
TRUE MOTION
Presentation mode dialog box
QUIT
QUIT
QUIT