2.12.3 Automatic Training; Reverberation - Furuno FSV-30 Operator's Manual

2. HORIZONTAL MODE

2.12.3 Automatic training

You may automatically scan the audio sector and audio bearing mark in the
sector of 12 , 24 or 36 as below.
1. First activate the range and audio bearing marks with the [R/B AUDIO] key.
2. While pressing and holding down the [AUTO TRAIN] key, press the [R/B
AUDIO] key to select desired auto train sector among 12 , 24 , 36 and OFF.
Watch the auto train mark to know the currently selected sector. The chosen
sector appears in large characters for five seconds at the top of the screen.
To turn off automatic training, select OFF at step 2.
2.12.4

Reverberation

You may choose the length of reverberation for the audio signal. The larger the
value the longer the reverberation, which makes it easer to hear the audio signal.
The setting range is 0-9 and the default setting is 0.
2-28
Auto train mark
Auto train sector
A
Audio bearing
mark
Auto train mark