Furuno FSV-30 Operator's Manual page 28

1. OPERATIONAL OVERVIEW
3. Select menu item desired with the trackball and press the [MENU] key. (For
example, select NOISE LIMITER.) A dialog box for the corresponding menu
item appears.
4. Select
[MENU] key to change setting.
Note: For items having options the arrows in the dialog box are replaced with
5. Use the trackball to select QUIT from the dialog box and press the [MENU]
key to close the menu.
6. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.
1-14
MENU
H-SCAN SETTING
TX INTERVAL : 9
TX PULSE LENGTH : 9
TX POWER : 9
TVG-NEAR : 0
TVG-MEDIUM : 0
TVG-FAR : 0
NOISE LIMITER : 5
NOISE LIMITER : 2
REVERBERATION
: 0
AGC : 0
2ND AGC : 0
NEAR AGC : 0
ECHO AVERAGE : 0
INT REJECT : 0
FREQ SHIFT : 0
FREQ/BEARING : 16
OTHERS...
H-SCAN SETTING menu
(raise setting) or
appropriate options. For example the dialog box for selection of picture
advance speed in the echo sounder mode looks as below.
Echo sounder picture advance speed dialog box
QUIT
QUIT
How to set numeric data
QUIT
1. Select
CANCEL
2. Press the [MENU] key to
3. Select QUIT to finish.
(lower setting) with the trackball and press the
QUIT
CANCEL
1/1
1/2
1/4
1/8
SPEED SYNC
or as desired.
change setting.