rosseto Safe T Serv 200 Instruction Sheet

Safe T Serv™ 200
Automatic Bulk Dispenser
Instruction Sheet | Model: DS206
before you begin
Be sure to read all the instructions before attempting to
assemble or operate the Safe T Serv™ 200 Bulk Dispenser.
• The illustration below shows all the parts that
are included .
• Carefully remove all parts from the carton and inspect
each part. If a part appears to be damaged or missing,
please contact Rosseto Customer Service.
a. Lid (2)
c. False Chamber (2)
e. Label Holder (2)
f. Pin (2)
g. Nozzle (2)
h. Stand (1)
i. Catch Tray (1)

loCAting the DisPenser

The Bulk Dispenser should
be located on a sturdy,
flat surface. A 120V power
source is required for the
Power Supply (j).
Allow sufficient room
above the unit, so the
Container(s) can be
accessed easily for
refilling and cleaning.
neeD AssistAnCe?
b. Paddle Wheel (2)
d. Container (2)
j. Power
Supply (1)
Customer service support: 1300 81 30 40
www.topshelfconcepts.com
Assembling The Parts
1. Place a Paddle Wheel (b) at the bottom of the front
cavity of each Container.
2. Place the assembled Containers (d) into the openings
in the Stand (h) and lock the Containers into position.
1.