Garland SCAR 601 QG Instruction Manual page 46

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 26
English
10. TRANSPORT
Never lift or transport the machine while the engine
is running. Also stop the engine whenever you move
between different work areas.
Wait 5 minutes after the machine is switched off
for the machine to cool down before storing or
transporting the machine. The machine's exhaust pipe
will remain hot after the engine is turned off.
If you have to lift the machine, check the technical
characteristics of the weight of the machine before
lifting it to ensure that it is a weight that you can
support.
If you are transporting the machine in a vehicle,
secure it firmly to prevent it from sliding or tipping
over.
11. STORAGE
Wait 5 minutes after the machine is switched off
for the machine to cool down before storing or
transporting the machine. The machine's exhaust
pipe will remain hot after the engine is turned off.
Never store the machine in places close to flammable
materials (dry grass, wood ...), gas or fuels.
Store this tool in a place not accessible to children
and in a safe way that does not endanger any person
and that is dry, clean and at a temperature between
0ºC and 45ºC.
Before storing the machine, follow the points in the
maintenance chapter.
If you are going to store the machine indoors, drain
the fuel as the vapors could come into contact with
a flame or hot body and ignite. If the fuel tank has
to be emptied this must be done in the open air and
following the recycling regulations.
To reduce the risk of fire, keep the engine, muffler,
and gas tank clean by removing cut material, oil, and
grease.
12. INFORMATION ON THE
DESTRUCTION OF EQUIPMENT
/RECYCLING
Protect the environment. Recycle the oil used by this
machine by taking it to a recycling center. Do not pour
used oil into drains, land, rivers, lakes or seas.
Dispose of your appliance in an
environmentally friendly way. We must
not dispose of machines together with
household garbage. Its plastic and metal components
can be classified according to their nature and
recycled.
The materials used to pack this machine
are recyclable. Please do not dispose of the
packaging in the domestic garbage. Dispose
of these packages at an official waste collection point.
46/100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scar 601 qg-v21

Table of Contents