Garland SCAR 601 QG Instruction Manual page 40

English
Avoid operating the machine when the ground is wet
whenever possible. Be especially careful if you use this
machine after it rains as the floor will be slippery and
you may slip.
Position the transport / work lever (9) all the way back
(transport position) and stop the engine by releasing
the safety lever (1) to move the machine to another
work area.
7.1. HOLDING AND GUIDING THE MACHINE
While working, always hold the machine with both
hands on the handlebar.
7.2. HEIGHT ADJUSTMENT
Attention! Stop the machine and wait for the blade
to stop before proceeding with the height adjustment.
It takes a few moments for the blades to come to a
complete stop after turning off the engine.
To adjust the height, first make sure that the transport
/ work lever (9) is fully forward (working position
then turn the cutting height adjustment lever (7) to the
desired height.
8. MAINTENANCE AND SERVICE
Perform the following maintenance operations and
care when you have finished working with the machine
to ensure the smooth running of this machine in the
future. For complete maintenance, we recommend you
take the lawnmower to your service technician.
Before performing any maintenance on the
machine or repair make sure the engine is
stopped and remove the spark plug pipe.
Perform all maintenance on the machine with the
machine on a flat, unobstructed surface.
WARNING! Do not modify the machine or cutting
elements (blade). Improper use of these elements can
cause SERIOUS PERSONAL DAMAGE OR DEATH.
Use only suitable replacement for this machine in
order to obtain a proper performance of the machine.
This replacement can be found in the official
distributors of the machine. The use of other spare
parts can cause risks, damage to the user, people
around and the machine.
Do not adjust the carburetor. If necessary, take your
machine in for service. Carburetor adjustment is
complicated, and only the technical maintenance
service must do them. Incorrectly setting the
carburetor may cause damage to the engine and will
),
be cause for cancellation of the warranty.
Removing the security devices, improper
maintenance, or replacements with non-original spare
parts can cause injury.
40/100