Garland SCAR 601 QG Instruction Manual page 26

English
INDEX
1. Introduction
2. Security measures
3. Warning symbols
4. Machine symbols
5. Machine description
6. Start up instructions
7. Using the machine
8. Maintenance and service
9. Trouble shooting
10. Transport
11. Storage
12. Recycling or disposal of your machine
13. Warranty conditions
CE Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GBASCAR601QGV21M0621V1
DATE OF PUBLICATION: 05/07/2021
DATE OF REVISION: 05/07/2021
1. INTRODUCTION
30 Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
31 performance of this machine, which will facilitate your
task for a long period of time. Remember that this
36 machine has the most extensive and expert technical
assistance network which you can consult for the
36 maintenance, troubleshooting and purchase of spare
parts or accessories.
38
Warning! Read all safety warnings and
40 all instructions. The failure to observe all
warnings and instructions below can result in fire and/
44 or serious injury. Before using this machine, carefully
read the information in this manual on correct setup
47 and safe techniques.
52
Scarify only grass meadows. Do not use this
machine for any other purpose. For example: do not
54
use this machine to weed, sweep or sand any type of
surface. Using this machine for operations other than
54
those intended may cause dangerous situations.
54
Save all warnings and instructions for future
reference. If sold in the future, remember to give this
55
manual to the new owner.
56
The expression "Switch in open position" means that
the switch is switched OFF and "Switch in closed
position" means that the switch is turned ON.
Remember that the machine operator is responsible
for the damages and accidents caused to other people
or things.
The manufacturer will not be liable in any way for
damages caused by improper or incorrect use of this
machine.
26/100