Rack Mount Drive; Rack Mount Drive Specifications; Equipment Environment Specification - Dell PowerVault LTO User Manual

Table 17. Equipment environment specification
Dry-bulb temperature
5 to 45°C (40 to 113°F)
Dry-bulb temperature
Allowab Recom
2
le mended
3
15 to 15 to
35°C 25°C
(59 to (59 to
95°F) 77°F)
Note:
1. Product equipment is removed from the original shipping container and installed but not in use - for
example, during repair, maintenance, or upgrade.
2. Derate maximum dry-bulb temperature 1°C/300 m above 900 m (1.8°F/1,000 feet above 3,000
feet).
3. Derate maximum recommended dry-bulb temperature 1°C/300 m above 1,800 m (1.8°F/1,000 feet
above 6,000 feet).
4. Applies to LTO 9 drives
5. Applies to LTO drive generations 1 through 8.

Rack mount drive

Table 18. Rack mount drive specifications
Width
Length
Height
Weight
AC line voltage
Line frequency
Line current at 100 VAC
Line current at 240 VAC

Equipment environment specification

Product power off
Relative humidity
8% to 80% RH
Product operation (equipment is powered on)
Humidity range, non-
condensing
Maximu Allowab Recom
m rate le mended
of
change
5°C/ 20% to 20% to
hour 80% RH 50% RH
(9°F/
hour)
Physical Specifications
Power Requirements
1
Maximum wet-bulb temperature
26°C (79°F)
Maximum
dew point
temperature
Maximu 22°C (72°F) for
m rate LTO 9
of
change
5% RH/
hour
with no
condens
ation
48.3 cm (19.0 in)
44.0 cm (17.32 in)
9.0 cm (3.54 in)
10.23 kg (22.55 lb) Chassis empty
100 - 240 VAC
50 - 60 Hz, auto-ranging
1.9 A
0.8 A
Maximu Maximu
m wet- m
4
bulb elevatio
tempera n
5
ture
26°C 3050 m
(79°F) (10,000
feet)
Chapter 5. Specifications 55