Table of Contents
Advertisement
INTRODUCTION
For additional operation and maintenance information,
see the engine Operation and service Manual included
with the baler.
The operation and maintenance instructions in this
manual come from much field testing and other data.
Some information will be general because of varying
conditions.
Right-hand and left-hand, as used in this manual, is
determined by facing the direction the baler will travel
when in use.
Units of Measurement
Measurements are given in metric units of measurement
followed by the equivalent in U.S. units. Hardware sizes
are given in millimeters for metric hardware and inches for
U.S. hardware.
Replacement Parts
To receive quick and efficient service, always remember
to give the dealer the following information:
•
Correct part description or part number.
•
Model number of your baler.
•
Serial number of your baler.
Baler Identification
Machine Model No. _____________________________
Machine Serial No. _____________________________
Engine Serial No. ______________________________
Date of Delivery: _______________________________
Dealer Information
Dealer Name and Address:
____________________________________________
____________________________________________
____________________________________________
Dealer's Telephone No. __________________________
Dealer's Fax No. _______________________________
4283392M1
GENERAL INFORMATION
Find manuals at https://best-manuals.com
General Information
01-3
Advertisement
Table of Contents
