Table of Contents
Advertisement
1 - Introduction
The aim of this manual is to enable the owner and
driver to operate the equipment safely and properly.
If the instructions are carefully observed, the
harvester will be in operation for many years,
following AGCO's tradition. The harvester
configuration and setup at the Dealer will ensure
that these operational and service instructions are
correctly understood.
Always contact a Dealer if any part of this Manual is
not fully understood. It is essential that these
instructions are fully understood and observed.
The daily maintenance must become a routine.
Always keep a record of the equipment's service
hours.
When ordering new parts, use only MF original
parts. The MF Dealers network supplies original
parts and can provide you installation and use
advice. The use of low quality parts can cause
severe damage to your equipment.
It is recommended to the customers to purchase
service parts only at authorized MF Dealers.
Due to the variation on the operational conditions,
it is impossible for the manufacturer to make a
comprehensive or a definitive statement on its
publications relating to the performance or ways of
use of its equipment, nor be responsible for any
damage or losses resulting from such statements,
or inaccuracy or omission.
To avoid the possibility of voiding the warranty,
consult your MF Dealer about special instructions,
in case the harvester has to be operated under
special conditions, which can be harmful for the
equipment (operation in deep waters or swamps,
for example). These harvesters havebeen designed
for use in agricultural applications only (suitable
use). Any other use will be considered as irregular.
AGCO will not be liable for personal injuries or
damages to the equipment resulting from misuse.
It will be totally the user's responsibility the
consequences for all misuse of the equipment.
MF 5650 ADVANCED
The unrestricted commitment and adherence to the
operation, services and maintenance requirements,
as per specified by AGCO, are considered essential
factors for the proper use.
These harvesters must be operated and serviced
only by qualified personnel, familiarized with the
equipment's characteristics and also with the safety
rules and regulations (accident prevention).
It is recommended that customers contact an MF
Dealer in case of any after sale problem and for
any setup which may be required.
2 - General Recommendations
Why is safety so important?
1 -
injuries or death.
2 -
Accidents usually bring onerous costs.
3 -
The present Manual describes safety procedures
and recommendations related to the harvester.
This Section of the Manual aims to point out some
basic safety situations related to your harvester, as
well as some suggestion about how to avoid risky
situations and reduce the risks of accidents.
Therefore, the user must be provided with all
necessary means and orientation available. For
each accessory and working situation, there is
always a number of cautions which would be
impossible to list in this Manual.
It is impossible for AGCO do Brasil to make a direct
control over all use situations, maintenance or
service to which the harvester is subjected.
Therefore, it is the user's responsability to observe
the propper practices aiming his/her safety and the
harvester integrity, and also the safety of other
people or equipments on the same working area.
Find manuals at https://best-manuals.com
1. Safety Guidelines
Accidents can lead to disabling personal
Accidents can be avoided.
1
1-3
Advertisement
Table of Contents
