General Information
SAFETY
Safety Alert Symbol
FIG. 31: The safety alert symbol indicates information
that
you
need
to
understand!
ATTENTION! BE ALERT! THIS IS ABOUT YOUR
SAFETY!
Read the information. Use good maintenance and
operating procedures. Prevent personal injury or death.
Safety Signs
If a used baler has been purchased, be sure that all the
safety signs are in the correct location and can be read.
Replace any safety signs that can not be read or are
missing. Replacement safety signs are available from
your dealer.
The location of the safety signs is shown at the end of this
section.
Safety Messages
FIG. 32: When you see the following words and symbols
in this Operator Manual, UNDERSTAND the instructions.
The information is about personal safety.
m
DANGER: Indicates
hazardous situation that, if not avoided,
WILL result in DEATH OR VERY SERIOUS
INJURY.
m
WARNING: Indicates
hazardous situation that, if not avoided,
COULD result in DEATH OR SERIOUS
INJURY.
m
CAUTION: Indicates
hazardous situation that, if not avoided,
MAY result in MINOR INJURY.
Informational Messages
IMPORTANT: Indicates instructions or procedures which,
if not done correctly, can damage or destroy the
baler, baling material and items around the baler.
NOTE: Indicates methods to make operation and
maintenance more efficient and easy.
IMPORTANT and NOTE do not indicate personal safety
information. IMPORTANT and NOTE indicate information
and tips to help operate and service this baler.
01-22
GIVE
SPECIAL
FIG. 31
an
imminently
a
potentially
a
potentially
FIG. 32
Saf
Wc1957
4283392M1