Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Stihl 2016-07
Summary of Contents for Stihl 2016-07
- Page 1 STIHL Guide Bars Service Manual 2016-07...
- Page 3 Contents About this Service Manual ......Applicable Documentation ......Symbols in Text ..........Safety During Repair Work ......Protective Gloves..........Safety Glasses..........Spare Parts............. Nose Sprocket ..........Overview............Tools, Servicing Aids ........Removing the Nose Sprocket ......Installing the Nose Sprocket ......Guide Bar Nose ..........
- Page 4 If there is a risk of particles being thrown during the repair: Wear safety glasses. Spare Parts If spare parts not approved by STIHL are installed, they may not fulfill the required function or deactivate safety devices. This can result in serious or fatal injuries.
- Page 5 – Removing the Nose Sprocket The nose sprocket can be replaced on STIHL Rollomatic E and STIHL Rollomatic E Light guide bars. The nose sprocket cannot be replaced on STIHL Center-punch the rivet heads (2). Rollomatic E Mini and STIHL Rollomatic E Mini Light Use a 6.5 mm drill to drill away the heads of the rivets...
- Page 6 (1). Fit the countersunk rivets (2) and form their heads with a hammer. Each rivet head must completely fill the hole recess (arrows). Lubricate the bearing in the nose sprocket (5) with STIHL Multispray. Guide Bars...
- Page 7 Position the nose (3) so that its holes line up with the holes in the guide bar (1). The bar nose can be replaced on STIHL Rollomatic ES and STIHL Rollomatic ES Light guide bars. Fit the countersunk rivets (2) and form their heads.
- Page 8 If the joints (arrows) in the running faces are not the same height: Grind down the projecting rails. Guide Bars...
- Page 9 Inspect bar body for cracks and damage. Clamp the center of the guide bar in a vise. The burr can also be removed with a flat file or the STIHL guide bar dresser. Check groove depth with a filing gauge of the right pitch.
- Page 10 Insert a spacer that matches the specified groove width in the wide portion of the groove. Clamp the affected area of the bar in a vise or hammer the bar rails against the spacer on a flat base. Inspect bar body for cracks and damage. Guide Bars...
- Page 11 Guide Bars...
- Page 12 RA_025_2016_01_01 englisch www.stihl.com...
Need help?
Do you have a question about the 2016-07 and is the answer not in the manual?
Questions and answers